<< Contents << Workbar << Setup ToolBar
 
Start / Stop / Cancel
 
The Start / Stop / Cancel button is at both ends of the Setup Toolbar button. The status "progress bar" is shown to the right of the Setup Toobar.
 
Trace Capture Process
 
The "Start" button starts the logic analyzer running...
 
 
The "Stop" button stops the logic analyzer during the Pre-fill Period.
 
 
...before the Trigger is detected...
 
 
If the trigger event never occurs, click the Stop button to download and view the captured data. This allows you to Trouble Shoot and determine why the trigger is not detected.
 
The "Stop" button can also be used after the Trigger occurs while the sample depth is being filled.
 
 
If the trigger is detected, the logic analzyer stores data to internal memory to meet the requested sample depth. The logic analyzer automatically stops running when the entire sample depth is captured. The GoLogic7 software then transfers the data to the computer for processing and display.
 
If needed, the "Cancel" button can also stop the trace download process...
 
 
GoLogicPro: to download fast as possible, USB 3.1 transfers the largest blocks of data allowed. The cancel button may seem ineffective since a block transfer cannot be interrupted once it begins. The cancel button does stop downloads between each large block transfer.
 
Copyright and trademark information